/* * ircd-hybrid: an advanced Internet Relay Chat Daemon(ircd). * config.h.dist: The ircd compile-time-configurable header. * * Copyright (C) 2002 by the past and present ircd coders, and others. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 * USA * * $Id: config.h.dist,v 7.59 2003/01/17 05:21:28 db Exp $ */ #ifndef INCLUDED_config_h #define INCLUDED_config_h #include "setup.h" /* * IRCD-HYBRID-7 COMPILE TIME CONFIGURATION OPTIONS * * Most of the items which used to be configurable in here have * been moved into the new improved ircd.conf file. * If you can't find something, look in doc/example.conf * * -davidt */ /* * File Descriptor limit * * These limits are ultra-low to guarantee the server will work properly * in as many environments as possible. They can probably be increased * significantly, if you know what you are doing. * * Note that HARD_FDLIMIT_ is modified with the maxclients setting in * configure. You should only touch this if you know what you are doing!!! * * If you are using select for the IO loop, you may also need to increase * the value of FD_SETSIZE by editting the Makefile. However, using * --enable-kqueue, --enable-devpoll, or --enable-poll if at all possible, * is highly recommended. * * VMS should be able to use any suitable value here, other operating * systems may require kernel patches, configuration tweaks, or ulimit * adjustments in order to exceed certain limits (e.g. 1024, 4096 fds). */ #define HARD_FDLIMIT_ MAX_CLIENTS + 60 + 20 /* XXX - MAX_BUFFER is mostly ignored. */ /* * Maximum number of connections to allow. * * MAX_BUFFER is the number of fds to reserve, e.g. for clients * exempt from limit. * * 10 file descriptors are reserved for logging, DNS lookups, etc., * so MAX_CLIENTS + MAX_BUFFER + 10 must not exceed HARD_FDLIMIT. * NOTE: MAX_CLIENTS is set with configure now */ #define MAX_BUFFER 60 #ifdef VMS /* *PATH - directory locations and filenames for VMS. * * Non VMS systems see below. * * IRCD_PREFIX = prefix for all directories, * DPATH = root directory of installation, * BINPATH = directory for binary files, * ETCPATH = directory for configuration files, * LOGPATH = directory for logfiles, * MODPATH = directory for autoloaded modules (disabled in VMS), * MSGPATH = directory for message files (disabled in VMS). */ /* IRCD_PREFIX not needed in VMS -larne */ /*#define IRCD_PREFIX "IRCD$BASEDIR:"*/ #define DPATH "IRCD$BASEDIR:" #define BINPATH "IRCD$BINDIR:" #define ETCPATH "IRCD$CONFDIR:" #define LOGPATH "IRCD$LOGDIR:" #undef MODPATH #undef AUTOMODPATH #undef MSGPATH #define SPATH BINPATH "IRCD.EXE" /* server executable */ #define SLPATH BINPATH "SERVLINK.EXE" /* servlink executable */ #define CPATH ETCPATH "IRCD.CONF" /* config file */ #define KPATH ETCPATH "KLINE.CONF" /* kline file */ #define DLPATH ETCPATH "DLINE.CONF" /* dline file */ #define GPATH LOGPATH "GLINE.LOG" /* gline logfile */ #define RPATH ETCPATH "IRCD.RSA" /* RSA private key file */ #define MPATH ETCPATH "IRCD.MOTD" /* MOTD filename */ #define LPATH LOGPATH "IRCD.LOG" /* logfile */ #define PPATH ETCPATH "IRCD.PID" /* pid file */ #define HPATH ETCPATH "OPERS.TXT" /* oper help file */ #define UHPATH ETCPATH "USERS.TXT" /* user help file */ #define OPATH ETCPATH "OPERS.MOTD" /* oper MOTD file */ #define LIPATH ETCPATH "LINKS.TXT" /* cached LINKS file */ #else /* VMS */ /* * Directory paths and filenames for UNIX systems. * IRCD_PREFIX is set using ./configure --prefix, see INSTALL. * The other defaults should be fine. * * NOTE: CHANGING THESE WILL NOT ALTER THE DIRECTORY THAT FILES WILL * BE INSTALLED TO. IF YOU CHANGE THESE, DO NOT USE MAKE INSTALL, * BUT COPY THE FILES MANUALLY TO WHERE YOU WANT THEM. * * IRCD_PREFIX = prefix for all directories, * DPATH = root directory of installation, * BINPATH = directory for binary files, * ETCPATH = directory for configuration files, * LOGPATH = directory for logfiles, * MODPATH = directory for modules, * AUTOMODPATH = directory for autoloaded modules * MSGPATH = directory for message files. */ /* dirs */ #define DPATH IRCD_PREFIX #define BINPATH IRCD_PREFIX "/bin/" #define MODPATH IRCD_PREFIX "/modules/" #define AUTOMODPATH IRCD_PREFIX "/modules/autoload/" #define MSGPATH IRCD_PREFIX "/messages/" #define ETCPATH IRCD_PREFIX "/etc" #define LOGPATH IRCD_PREFIX "/logs" #define UHPATH IRCD_PREFIX "/help/users" #define HPATH IRCD_PREFIX "/help/opers" /* files */ #define SPATH BINPATH "/ircd" /* ircd executable */ #define SLPATH BINPATH "/servlink" /* servlink executable */ #define CPATH ETCPATH "/ircd.conf" /* ircd.conf file */ #define KPATH ETCPATH "/kline.conf" /* kline file */ #define DLPATH ETCPATH "/dline.conf" /* dline file */ #define GPATH LOGPATH "/gline.log" /* gline logfile */ #define RPATH ETCPATH "/ircd.rsa" /* ircd rsa private keyfile */ #define MPATH ETCPATH "/ircd.motd" /* MOTD file */ #define LPATH LOGPATH "/ircd.log" /* ircd logfile */ #define PPATH ETCPATH "/ircd.pid" /* pid file */ #define OPATH ETCPATH "/opers.motd" /* oper MOTD file */ #define LIPATH ETCPATH "/links.txt" /* cached links file */ #endif /* !VMS */ /* Ignore bogus timestamps from other servers. Yes this will desync * the network, but it will allow chanops to resync with a valid non TS 0 * * This should be enabled network wide, or not at all. */ #undef IGNORE_BOGUS_TS /* HIDE_SERVERS_IPS * * If this is undefined, opers will be unable to see servers ips and will be * shown a masked ip, admins will be shown the real ip. * * If this is defined, nobody can see a servers ip. *This is a kludge*, it * has the side effect of hiding the ips everywhere, including logfiles. * * We recommend you leave this undefined, and just take care with who you * give admin=yes; to. */ #undef HIDE_SERVERS_IPS /* HIDE_SPOOF_IPS * * If this is undefined, opers will be allowed to see the real IP of spoofed * users in /trace etc. If this is defined they will be shown a masked IP. */ #undef HIDE_SPOOF_IPS /* TS5_ONLY * * If this is defined only TS5 servers may link to the network. See * doc/ts5.txt for more information. If your network has old servers * (hyb5, hyb6.0, +CSr) or hybserv you should NOT define this. */ #undef TS5_ONLY /* USE_LOGFILE - log errors and such to LPATH * If you wish to have the server send 'vital' messages about server * to a logfile, define USE_LOGFILE. */ #define USE_LOGFILE /* USE_SYSLOG - log errors and such to syslog() * If you wish to have the server send 'vital' messages about server * through syslog, define USE_SYSLOG. Only system errors and events critical * to the server are logged although if this is defined with FNAME_USERLOG, * syslog() is used instead of the above file. It is not recommended that * this option is used unless you tell the system administrator beforehand * and obtain their permission to send messages to the system log files. */ #undef USE_SYSLOG #ifdef USE_SYSLOG /* SYSLOG_KILL SYSLOG_SQUIT SYSLOG_CONNECT SYSLOG_USERS SYSLOG_OPER * If you use syslog above, you may want to turn some (none) of the * spurious log messages for KILL,SQUIT,etc off. */ #undef SYSLOG_KILL /* log all operator kills to syslog */ #undef SYSLOG_SQUIT /* log all remote squits for all servers to syslog */ #undef SYSLOG_CONNECT /* log remote connect messages for other all servs */ #undef SYSLOG_USERS /* send userlog stuff to syslog */ #undef SYSLOG_OPER /* log all users who successfully become an Op */ /* LOG_FACILITY - facility to use for syslog() * Define the facility you want to use for syslog(). Ask your * sysadmin which one you should use. */ #define LOG_FACILITY LOG_LOCAL4 #endif /* USE_SYSLOG */ /* CRYPT_OPER_PASSWORD - use crypted oper passwords in the ircd.conf * define this if you want to use crypted passwords for operators in your * ircd.conf file. */ #define CRYPT_OPER_PASSWORD /* CLIENT_FLOOD - client excess flood threshold(in messages) * The number of messages that we can receive before we disconnect the * remote client... */ #define CLIENT_FLOOD 20 /* NICKNAMEHISTORYLENGTH - size of WHOWAS array * this defines the length of the nickname history. each time a user changes * nickname or signs off, their old nickname is added to the top of the list. * NOTE: this is directly related to the amount of memory ircd will use whilst * resident and running - it hardly ever gets swapped to disk! Memory * will be preallocated for the entire whowas array when ircd is started. */ #ifndef SMALL_NET #define NICKNAMEHISTORYLENGTH 15000 #else #define NICKNAMEHISTORYLENGTH 1500 #endif /* HANGONGOODLINK and HANGONGOODLINK * Often net breaks for a short time and it's useful to try to * establishing the same connection again faster than CONNECTFREQUENCY * would allow. But, to keep trying on bad connection, we require * that connection has been open for certain minimum time * (HANGONGOODLINK) and we give the net few seconds to steady * (HANGONRETRYDELAY). This latter has to be long enough that the * other end of the connection has time to notice it broke too. * 1997/09/18 recommended values by ThemBones for modern EFnet */ #define HANGONRETRYDELAY 60 /* Recommended value: 30-60 seconds */ #define HANGONGOODLINK 3600 /* Recommended value: 30-60 minutes */ /* CONNECTTIMEOUT - * Number of seconds to wait for a connect(2) call to complete. * NOTE: this must be at *LEAST* 10. When a client connects, it has * CONNECTTIMEOUT - 10 seconds for its host to respond to an ident lookup * query and for a DNS answer to be retrieved. */ #define CONNECTTIMEOUT 30 /* Recommended value: 30 */ /* KILLCHASETIMELIMIT - * Max time from the nickname change that still causes KILL * automatically to switch for the current nick of that user. (seconds) */ #define KILLCHASETIMELIMIT 90 /* Recommended value: 90 */ /* * If the OS has SOMAXCONN use that value, otherwise * Use the value in HYBRID_SOMAXCONN for the listen(); backlog * try 5 or 25. 5 for AIX and SUNOS, 25 should work better for other OS's */ #define HYBRID_SOMAXCONN 25 /* CODE DISABLE SECTION * * If you have enabled efnet specific code these will be disabled automatically * else they are here for anyone else. */ #define VCHANS #define ANONOPS #define HALFOPS /* END OF CONFIGURABLE OPTIONS */ /* disable them for efnet */ #ifdef EFNET #undef VCHANS #undef ANONOPS #undef HALFOPS #ifndef HIDE_SERVERS_IPS #define HIDE_SERVERS_IPS #endif #ifndef HIDE_SPOOF_IPS #define HIDE_SPOOF_IPS #endif #ifndef TS5_ONLY #define TS5_ONLY #endif #endif /* * Default pre-allocations for various things... */ #ifndef SMALL_NET /* Normal net */ #define CHANNEL_HEAP_SIZE 1024 #define BAN_HEAP_SIZE 1024 #define CLIENT_HEAP_SIZE 1024 #define LCLIENT_HEAP_SIZE 512 #define LINEBUF_HEAP_SIZE 1024 #define USER_HEAP_SIZE 1024 #define DNODE_HEAP_SIZE 2048 #define TOPIC_HEAP_SIZE 1024 #else /* Small Net */ #define CHANNEL_HEAP_SIZE 256 #define BAN_HEAP_SIZE 128 #define CLIENT_HEAP_SIZE 256 #define LCLIENT_HEAP_SIZE 128 #define LINEBUF_HEAP_SIZE 128 #define USER_HEAP_SIZE 128 #define DNODE_HEAP_SIZE 256 #define TOPIC_HEAP_SIZE 256 #endif /* DEBUGMODE is used mostly for internal development, it is likely * to make your client server very sluggish. * You usually shouldn't need this. -Dianora */ #undef DEBUGMODE /* define DEBUGMODE to enable debugging mode.*/ /* * this checks for various things that should never happen, but * might do due to bugs. ircd might be slightly more efficient with * these disabled, who knows. keep this enabled during development. */ #define INVARIANTS #define CONFIG_H_LEVEL_7 #include "defaults.h" #endif /* INCLUDED_config_h */